Alcatel ZM2033CP+ Dual Stage Rotary Vane Vacuum Pump, 1.5HP Rebuilt (7776) W

Description

Alcatel CIT M2033CP+ Dual Stage Rotary Vane Vacuum Pump, 1.5HP Working (7776) W Item is in good cosmetic condition with some signs of use that does not affect function. Runs quietly. No further testing done. See pictures for more details.
Alcatel Z M2033CP+ Dual Stage Rotary Vane Vacuum Pump, 1.5HP Rebuilt (7776) W
Item is in good cosmetic condition with some signs of use.  See pictures for more details.  Pump was rebuilt by Busch 2013 (see certificate) then not used. Pulls down to 28.1 Millitor. Gage NOT Included. No further testing done. See pictures for more details.
Manufacturer: Alcatel
Model #/ Model: Z-M2033 CP+
Description: The 2033CP+ vacuum pump is an oil sealed dual stage rotary vane mechanical vacuum pump
The following is Taken From Manufacturer's Website
Alcatel 2033CP
rotary vane pumps have a pumping speed of 27 cfm and a ultimate pressure of 1 x 10
-4
Torr.   These pumps are designed to withstand corrosive gas.
It is reliable and designed for applications in the chemical industry and any vacuum processes that demand chemical resistance.   The CP series has increased resistance to chloro and fluoro containing gases used in semiconductor processing.
Applications:
Chemical Vapor Deposition (CVD)
Low Pressure Chemical Vapor Deposition (LPCVD)
Semiconductors
Ion Implantation
Degassing
Molecular Distillation
Dry Etching
Epitaxy
Vacuum Ovens
Gas Analyzers
Centrifuges
Sterilization
Leak Detection - Mass Spectrometry
Ability to handle corrosive gas
Prepared for PFPE Inert Fluid Oils
Designed for use in chemical industry vacuum processes and semiconductor industry
Rebuilt by Busch
​I
ncludes:
Alcatel Vacuum Pump
Quality Assurance Test Certificate (2013)
​Specifications:
Note*
this data was taken from an online source and may not pertain to this particular model.
Peak Pumping Speed: 27 CFM
Ultimate Pressure:
1 x 10
-4
Torr
1.5 hp Motor
Motor 3 Phase 208 or 480 VAC
Oil Capacity: 3.6 Liters
Inlet: KF40
Outlet: KF40
Water System Flow: 5 L/MIN
Water System Integrity: 80 pressure
Motor Voltage: 208
Oil Type: Hydro
Motor Power: 3.1 A
Inlet Pressure: 4.8 MTORR
Bearing Cover Temp: 40ºC
Outlet Temp: 38ºC
Coupling Cover Temp: 33ºC
S. Seal Pressure: 6
AVX N2 Flow: 15
​Weight: 135 Lb
Shipping Weight: 200 Lb
Dimensions: LxWxH": 28x9x13"
Shipping Dimensions: LxWxH": 33x29x22
Crating Fee:
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
THE simple solution for eBay sellers.
Track Page Views With
Auctiva's FREE Counter