Doug Fleenor Design DMXTSTR-3 DMX Line Tester - 3 pin XLR

Description

Doug Fleenor Design DMXTSTR-3 DMX Line Tester - 3 pin XLR
The DMX512 Line Tester instantly displays the presence of the +Data and -Data signals when plugged into a DMX control line or feed-through connector. Observing the indicators while fading all the dimmers from zero to full will detect if either line is stuck high. Swapped +Data and -Data lines can be determined by sending all dimmers to full.
Specs
Connector: 5 pin male or 3 pin male
Indicators:
* Data + Green T1 light emitting diode (LED)
* Data - Red T1 light emitting diode (LED)
Effective input impedance: 220 Ohms (each line)
Power input: None, draws power from DMX line
Color: Silver connector body with white label
Size and weight: 1.9" long, 0.8" maximum diameter, 1.5 ounces