-40%
EMF Meter LCD Digital Electromagnetic Field Radiation Detector Ghost Hunting
$ 18.78
- Description
- Size Guide
Description
Feature
:
PRECISE MEASUREMENT: Equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on the clear LCD digital display after processing by control micro-chip. Testing magnetic field radiation with optional units mG/µT, the electric field with unit V/m. This emf meter can not test the RF value.
SOUND-LIGHT ALARM: When the testing result exceeds the value(0.4µT (4mG) or 40V/m), the screen will turn red and the indicator will be flashing, and the buzzer will alarm. If you’re testing some quiet areas, you can close the buzzer first, avoid disturbing the others.
MULTIFUNCTION: Testing average or peak value(Maximum) reading, and one key hold the data for a view. Large and back-light LCD is clear for viewing. Auto power off after 5 minutes without operation.
WIDELY APPLICATIONS: Mainly used for testing TV, computer, printer, microwave oven, refrigerator, cell towers, for low-frequency home appliances, and ghost hunting, etc.
Specifications
Electric field:
Range: 1V/m-1999V/m
Alarm threshold: >40V/m
Resolution: 1V/m
Magnetic field:
Range: 0.01μT-99.99μT / 0.1 mG - 999.99 mG
Alarm threshold: >0.4μT
/ 4mG
Resolution: 0.01μT / 0.1 mG
Multi-functional & Easy Operation
Power On/Off & Data Hold
Short press
this button to turn on the meter.
Press this button fter setup the meter, the reading will be locked, press again can concel it.
Long press this button to turn off the detector.
Average/Peak Value Mode & Buzzer Switch
Short press
this button to switch average or peak value mode.
Long press
this button to turn the buzzer on or off.
Unit Switch
Short press
this button to switch the magnetic field unit between uT and mG.
Large & Clear LCD Display
When magnetic field's reading more than 40V/m and electric field's reading more than 0.4μT/4mG, the screen will turn
red
, and show "
Warning
" on display.