EMF Radiation Meter EM2 - wifi wireless electromagnetic electrosmog detector

Description

Up for bid is a lightly-used EM2 EMF electromagnetic radiation meter/detector from Heliognosis.  Uses a 9V battery but I will remove it for shipping.  The manufacturer's description is below.  The photos show: - 1st photo shows no EMF reading by an open window... 8th photo shows high reading next to a cordless phone... 9th photo shows slight reading next to a light switch, 10th photo is  the wall a few inches above the light switch showing no reading...
The new Electromagnetic Meter
EM2
Heliognosis developed the first inexpensive omni-directional broadband monitor for measuring all sources of electromagnetic radiation up to microwaves named the emm. This compact device enabled users concerned about
potential health risks
to locate areas of exposure. Following the success of the emm initiative, Heliognosis has now released the EM2. The EM2 has several improvements over the original emm including improved accuracy, frequency response and ruggedness. The new design includes a fast response analog display for detecting pulsed transmissions from digital equipment such as wifi, cell networks and smart meters. The included rubber boot is comfortable to hold and elegant while providing protection from bumps and falls. The display employs a unique logarithmic scale to capture both very weak and very strong signals without the need to switch ranges. The color coded scale helps to identify safe from dangerous conditions.
EM2
bridges the gap between cheap limited response monitors and full spectrum units. No bigger than a mobile phone,
EM2
detects all electromagnetic emitters from ELF (extremely low frequencies) up to microwaves. This includes virtually all sources of electromagnetic radiation like:
WIFI, cell and mobile phones
radio and television broadcast towers
AC power lines, smart meters
microwave ovens
amateur and CB radio
military, aircraft and police band radio
high-efficiency fluorescent tubes
Use the Heliognosis
EM2
to identify hotspots in your local environment. It is ideal for determining safer distances from electromagnetic sources and locating hidden transmitters. For more information Heliognosis Experimental Report 6:
Detecting Electromagnetic Radiation and Minimizing its Health Risks
investigates common and less well known sources of emissions.
Using
EM2
Our small, sensitive circuit detects the electric field component of the electromagnetic wave and converts it into a visually diplayed signal. Operation is simple - extend the antenna and power on the unit. After activating the power switch, the
EM2
will begin displaying the measured electromagnetic field strength. Hold the unit in front of you while approaching potential sources of electromagnetic radiation.The readings will increase as you get closer to the source. Metal objects and buildings will block the radiation. You can use this property to help locate powerful sources located at a distance. If you pass in front of a building and the readings drop, it is likely that the source is behind the building. Driving with the meter on the dashboard or suspended from the rear view meter is an excellent way to survey sources in your neighborhood.
EM2
Specifications
Frequency response: 50Hz to 18Ghz
Sensitivity range: 0.005µW/cm
2
to 40mW/cm
2
Accuracy: +/- 10% 50Hz to 10Ghz
Operating temperature: -10C to +40C, 14F to 100F
Battery life: 9V Duracell, approx 50 hours