ETC UFR2 Unison Foundry Dual-Zone DMX Relay Controller

Description

ETC UFR2 Unison Foundry Dual-Zone DMX Relay Controller
The Foundry Relay Controllers offer DMX controlled fully-rated 20-Amp relays to switch lighting loads on and off. Relay Controllers mount to electrical junction boxes.
APPLICATIONS • Arena and stadium suites • Office buildings • Conference and meeting rooms • Healthcare facilities • Houses of worship • Classrooms • Hospitality and restaurants • Retail
FEATURES • Switched power control of two circuits • 20A fully-rated relays for use with general purpose, tungsten, fluorescent and LED loads • Supports plug loads • 120/277VAC power input • DMX controlled and RDM configurable
GENERAL • UL and cUL LISTED • Rated for plenum use
FUNCTIONAL • Control for individual fixtures, zone power • Supports USITT DMX512-A (ANSI E1.11) • Supports RDM (ANSI E1.20)
MECHANICAL • Constructed of injection-molded ABS plastic • Button interface and LED indicators for configuration • Half-inch conduit knockout mounted • Mains-voltage wiring exits through knockout mount • 0-10V dimming control wiring exits through knockout mount • DMX wiring connects to side of controller • Mains power input connections: - 12 AWG Hot - Black - 14 AWG Neutral - White • Relay output connections: - Zone 1, 12 AWG - Red - Zone 2, 12 AWG - Red/White • Optional mounting plate available for applications that require low-voltage wiring to be in conduit
ELECTRICAL • 120V-277V, 50/60Hz power input • Normally Open (NO) 20-amp fully-rated relay • Supports lighting and plug loads • UL and cUL LISTED - Conforms to UL 508 and UL 2043
DMX INPUT PORT • Optically-isolated from Controller electronics • Withstands fault voltages of up to 250VAC • Integrated DMX/RDM termination
CONFIGURATION • Remote configuration available via RDM controllers including: - ETC DMX/RDM gateway networked to a device running ETC Net3 Concert software - ETC control console with RDM functionality - 3rd party configuration and control products • Manual configuration of the starting DMX address on the controller
THERMAL • Ambient room temperature: 0 to 50°C • Ambient humidity: 5 to 95% non-condensing
ufr2.png