Fascut FS-600 Portable Rebar Cutter Bender W/ Foot Pedal

Description

You are purchasing a
USED
Fascut FS-600 Portable Rebar Cutter Bender W/ Foot Pedal. This Rebar cutter has been used but it is still in very good condition. Please see the attached pictures just taken of the actual items for sale.  The cart that is shown in the photos is not included!
Please note that we have extended the handling time on this item to allow for us to arrange shipment as this will be put on a skid and trucked.  If you would like to arrange your own shipping we would be happy to put it on a skid and you can arrange for your own shipping and we will of course wave the shipping fee.
Also, in accordance with most shipping companies all fluids will be drained from this unit for shipping.  You will need to refill the fluids before you use the bender.
If you have any additional questions, please send us a message.
P57-235405-1
Contractors can take this portable rebar bender and cutter combination machine to the jobsite.  At just 180 pounds it can be picked up and carried by two people.  Both cut and bend up to and including 3/4" (#6) grade 60 rebar.  Just plug it into a standard 110-volt outlet or 5000 watt generator.
Set the FS-600 on the ground next to your pile of rebar or up on a bench or table.  The bending angle is adjusted with a simple control knob. Once set the bends will be uniform and accurate.  A push button control on the machine is safe and easy to use.
NOTE:  Pictures show an optional foot pedal control which is included with this unit. Plug in the foot pedal control so both hands are free to guide the rebar.  Add the reference fence attachment for an easy to use adjustable material stop up to 4 feet.
Description
Specifications
Bender Capacity
(grade 60)
1 bar - #6, #5, or #4
2 bars - #3
Cutter Capacity
(grade 60)
1 bar - #6 or #5
2 bars - #4
3 bars - #3
Dimensions
26"L x 13"W x 16"H
Weight
180 pounds
Speed
2 - 4 seconds
Voltage
110-120 volts standard
220-240 volts optional
50/60 cycles, single phase
Amps
14 @ 110 volts
7 @ 220 volts
Power Supply
Two stage hydraulic pump driven
by a one horsepower continuous
duty electric motor.
Operation Control
Push Button or optional plug in
foot pedal.
Automatic return on release.
Bend Angle Control
0 - 130 degrees, infinitely variable
with accurate repeat
Bend Die Diameters
2-1/2" and 3-3/4"
Bender Method
Three point bending system
Cutter Method
Open Jaw Shear
Cutting blade edges
8 usable sides
Reference Fence Attachment
Optional - adjustable to 4 feet