For Jointed Teddy Bear = 10 – 2¼ " Hard Board Discs – with Tap Bolt Set

Description

For Jointed Teddy Bear = 10 – 2¼ " Hard Board Discs – with Tap Bolt Set
Complete set of hardboard discs to create five joints for one teddy bear or doll – makes your doll or teddy bear more lifelike – easier to pose.
Hardware with it is: 5 tap bolts, 10 washers, and 5 nuts with plastic inside for secure locking (see picture).
Very easy to use - one disc in the arm - the other in the body – tap bolt and washer goes through discs and fabric, then put the washer and nut tighten to hold inside the body creating a free moving jointed arm, leg or head. If you are not use to using tap bolts/washer/nuts – there is a very good You Tube titled
Making a Jointed Teddy Bear – The Joints.
To get the right size disc - lay the disc on the limb and if it fits inside the seam, then it is the correct size. I usually mark the inner hole at that time and use an awl to spread the material to insert the cotter pin or tap bolt.
If you are buying several items from me – please add them to your cart. Then pay for them all at once and I will discount the shipping. Contact me if buying multiple discs.
Smoke Free Home