-40%
Hamamatsu R6095 PMT Photomultiplier KIT w/SOCKET, Electronics, Coupling Compound
$ 57.55
- Description
- Size Guide
Description
Hamamatsu R6095 PMT KIT -Photomultiplier Tube with socket and electronics KIT to install a new 111 or 120 MegOhm Voltage Divider and wire Leads. Once completed, this PMT setup works well with many battery operated survey meters and USB or battery powered High Voltage Bias Power Supplies. These PMTs work well with Ludlum meters, Gamma Spectacular HV Bias Drivers, and Theremino PMT adapter. Ships with the Hamamatsu Data Sheet and instructions for installing the voltage divider.
If you want to buy one without the socket and wiring kit, please see my other listings and save some money on this very fine PMT.
These are PMTs that normally sell for hundreds of dollars when purchased new. They are great for Scintillation Counting and for Gamma Spectrometry. Each tube leaves my lab tested and guaranteed to satisfy.
Need a Mu-Metal Shield for this PMT:
https://www.ebay.com/itm/252021250282
The R6095 is a 1-1/8 inch (28mm) diameter, Head-on type, Bialkali photocathode. The maximum spectral response is 300 to 650 nm, peaking near 420nm, great for use with NaI, plastic, or many other scintillators.
Specifications
Minimum Wavelength
300 nm
Outside Diameter
28 mm
Peak Wavelength
420 nm
Maximum Wavelength
650 nm
Viewing Direction
Head on
Rise Time
4 ns
Photocathode Material
Bialkali
Window Material
Borosilicate
Anode Current
0.1 mA
Typical Photocathode Luminous Sensitivity [µA/lm]
95
Photocathode Peak Radiant Sensitivity [A/W]
0.088
Gain
2.1 x 106
Max. Supply Voltage Between Anode and Cathode
1500 VDC
Max. Supply Voltage Between Anode and Last Dynode
250 VDC
Operating Temperature
-80 to +50 °C
I have tons of other radiation detection related equipment listed, so please check out my
other items
.
I
am always adding new items in this category, so please don't forget to add me to your
favorites list
and come back often!
This listing is for a Hamamatsu R6095 PMT, including the PMT, Socket, Voltage Divider, Wire Leads, Coupling Grease and illustrated wiring instructions.
You will have to solder the parts onto the socket in order to make it operate.
Please check my listings for other configurations of this PMT and other available Photomultipliers and Scintillator supplies.
This listing is for one PMT only. If you need more than the quantity eBay says is available, contact me for a special listing and price.
I ship very fast, same day if early enough, next day otherwise (except Holidays and Weekends). This item will be packed safe and secure.
Thanks for looking. Please don't forget to check my feedback and see my other items.