JBL Control 31-WH, 10" 2-Way High-Output In/Outdoor Monitor Speaker-White-1 unit

Description

Please send me a message for a shipping quote, cost varies depending on area and quantities.
I ship to HI, ask for a shipping quote.
JBL CONTROL 31-WH Overview
The white
Control 31 Speaker
from
JBL
utilizes high-power components, computer optimized horn, and a complex network to achieve a smooth, powerful high-fidelity performance, extended bandwidth, and a well-controlled and defined coverage from a compact loudspeaker. The Control 31 features a 10" low-frequency driver with a pure butyl rubber surround, 2" high-temperature fiberglass voice coil for high sensitivity, high-output capability, and stability. The high-output, high-frequency compression driver has a unique patented design, high-temperature polymer diaphragm, and fluid-cooling for high-output levels with low distortion.
This passive speaker has a 250W capability plus a 150W transformer for 70V or 100V distributed lines with 8 Ohms thru bypass. With a WeatherMax multi-layer grille, it can be installed both indoors and outdoors, and a InvisiBall mounting system allows for quick and easy installation.
Features:
High-output 2414H-C compression driver with 1" exit
Woven-fiberglass cone for a high degree of weather capability
Pure butyl rubber surround for clean sound quality
Optimized cone geometry provides for smooth frequency response and good off-axis performance
Linear suspension spider provides low distortion
FEA-optimized motor construction produces minimum harmonic distortion
Aluminum coupler ring outside the pole post reduces distortion and increases sensitivity
110 x 110° symmetrical coverage
WeatherMax multi-layer foam and tight-weave screening grille
InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward)
Sealed input-panel cover and screw-down input terminals included for secure connection
Painted with a UV-resistant finish to resist yellowing due to UV exposure
Specifications
Frequency Response (-10dB)
33Hz – 19kHz
Frequency Response (±3 dB)
42Hz – 14kHz
Power Ratings
250 W (1000 W peak), 2 hrs. 200 W (800 W peak), 100 hrs.
Maximum SPL (1m)
116 dB continuous (123 dB peak)
Sensitivity
92 dB
Coverage Angle
110° x 110°
Directivity Factor (Q)
5.7, averaged 500 Hz to 10 kHz
Directivity Index (DI)
7.3 dB, averaged 500 Hz to 10 kHz
Impedance
8 ohms
Crossover Type
2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry.
Transformer Taps
70V: 150W, 75W, 38W, 19W 100V: 150W, 75W, 38W Insertion Loss: <0.65 dB at any tap setting Thru Setting: 8Ω nominal
Recommended High-Pass
Protective 40 Hz high-pass (24 dB/oct) for any transformer tap and for 8Ω operation
Drivers
LF: 250 mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52 mm (2 in) voice coil on high-temperature fiberglass voice coil former, optimized cone geometry, linear suspension spider, FEA-optimized motor construction, aluminum ring on pole piece.
HF: JBL 2414H-C compression driver with 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, JBL-patented design, fluid-cooled.
Enclosure
High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5 mm foamed polyurethane secondary mold for additional cabinet density.
Grille
Zinc-plated and thermoset-composite coated steel, WeatherMax™ multi-layer foam with tight-weave mesh vapor barrier.
Mounting hardware
InvisiBall wall-mounting system included. Ten 6 mm attachment points on cabinet for suspending or for optional U-bracket. One 6 mm secondary safety attachment point (for forged shoulder steel eyebolt, not included) on back panel.
Outdoor Capability
IP-55 per IEC529. Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray. Optional MTC-30MK marine-kit grille increases longevity in highly corrosive environments.
Input Connectors
Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2).
Safety Agency
Transformer is listed per UL1876
Colors
Black (RAL9004) or white (-WH, RAL9003)
Dimensions (H x W x D)
593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)
Net Weight (each)
18.8 kg (41.5lb)
Shipping Weight (ea)
22.0 kg (48.5 lb)
Included Accessories
1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6 mm x 305 mm InvisiBall hex wrench.
Optional Accessories
MTC-30MK Marine-Kit Grille in black or white (-WH), consisting of grille and protective covers for baffle screws. MTC-30CM (&-WH) Ceiling-Mount Adapter for installing speaker down from the ceiling. MTC-30UB (&-WH) U-Bracket