LMTV/MTV/FMTV Replacement CTIS / Wheel Protector (SET OF 4) M1078 M1079 M1081

Description

Replacement LMTV/MTV CTIS/Wheel Protector (SET OF 4)
-Powder coated textured satin black for long durability
-Grade 8 hardware for installation
-Simple installation
-Designed and fabricated at our shop in Washington, Missouri!
*Works with steel rims. Does not work with aluminum rims*
Tools Required:
15/16” Socket
13/16” Socket
7/8” Open End Wrench or socket
Medium strength Thread Lock
Depending on current wheel stud condition we recommend running a 5/8-18 die over the wheel studs used for mounting the cover
Installation Instructions:
-Install Edge guard on inner edge of wheel cover
-Place wheel cover over vehicle wheel assembly
-Align CTIS valve stem with large hole in cover
-Mark the three studs used for mounting the cover visible thru the cover mounting holes
-Install coupling nut on marked studs from previous step NOTE: if the coupling nut is difficult to thread on to the wheel stud use a 5/8-18 die to clean the threads of any          debris
- Tighten Coupling nuts until they are tight to existing wheel stud nuts
-Mount wheel cover using provided 5/8-18 bolts & washers
-Tighten bolts using a 15/16” socket to 40-45ft lbs.
-Adjustment of the CTIS feed hose may be required. If so loosen the banjo bolt and rotate the line for proper clearance.