MyGeiger ver.3 PRO DIY Geiger Counter Kit Gamma Radiometer Dosimeter SBM-20 tube

Description

Assembled and soldered newest third edition of MyGeiger PRO DIY Radiometer kit
Include SBM-20 / STS-5 Geiger tube and lithium rechargeable battery
We introduce the newest edition of
MyGeiger ver. 3 PRO
for measuring gamma radiation dose-rate and for precision average CPS counting. Version 3 was designed for high count rate applications where you need counter stability,  performance on HV voltage output and software options for precision measurements of radiation samples. This device can be used for portable field measurements, laboratory application or for online monitoring station.
The device was build for enthusiasts, a physics students, teachers and researchers engages in radiation study. It fit hobby projects as well as environment or laboratory test. MyGeiger ver.3. PRO is compatible with wide range of
400V
and
500V
Geiger tubes; it has flexible options for calibration that allows you to adjust your counter for different GM tubes. The kit has re-designed efficient high voltage with enlarged output power, faster microprocessor with updated and enhanced software, setup menu, USB CPM / CPS logging, faster lithium charger, reduced power consumption, power safe sleep mode and comfortable controls. Now it got the ability to operate in radiation field higher than 1500uSv/h with SBM-20 where tube is operate at the maximum possible count rate.
Have any question or need help to download PDF manual? You are welcome to contact me!
Technical specifications:
High Voltage: 420V or 500V with stabilization
High Voltage output current 50uA at 500V
High Voltage is independent from microprocessor, but can be switched ON/OFF by software
Geiger Tube PCB compatibility: SBM-20 or STS-5
Geiger Tube Wire connection compatibility: LND-712, LND-7317, SBT-9, SI-29BG and more
128x64 High Quality Graphic LCD with Shield PCB
Calibration Menu
Gamma Radiation Dose Rate Display range: 0.01 uSv/h – 9.99 mSv/h
Gamma Radiation Dose Rate with SBM-20: 0.05uSv/h – 1500 uSv/h
Gamma Conversion Factor calibration 0.7 – 9.0 CPS for 1uSv/h
DER updating period on LCD: 1 second
DER full measurement period: 60 seconds
CPS Ratemeter Counter Mode for external scintillation probe
Average CPS mode for precision sample testing
Sample time for precision measuring Average CPS: 5-60 minutes
Dead time correction option: 10uS - 250uS, set zero for disable
Audible Alert function with adjustable threshold: from 1uSv/h to 200uSv/h
Built in USB port for logging CPM or CPS
Adjustable USB port UART speed for logging software 2400-9600 baud
Mute / Backlight / Menu control with comfortable big buttons
Battery Indicator and USB detection
Built in USB charger with overcharge protection for 3.7V lithium battery
Recommended battery type: 3.7V lipo with capacity >300mAh
Battery quiescent current consumption at background: 2.5mA
Battery current consumption in sleep mode: less than 0.2mA
Operating Voltage: 3.0V – 5V
Sleep function, option to use external mechanical ON/OFF switch if required
Auto power OFF option after 10 minutes - 4 hours, set zero to disable
Quality soldered PCB with modern SMD components, the kit is assembled
Dimensions: 51mm x 130mm x 32mm
UPC Number: 634154871188
SKU Number: RH-K-GK-PRO
Package include:
1pcs Soldered Assembled MyGeiger ver.3 PRO with LCD
1pcs SBM-20 or STS-5 Geiger tube
1pcs installed lithium battery with capacity >400mAh
The device has two working modes: Gamma Dose Rate Meter and Average CPS counter.
Gamma Dose Ratemeter:
the default Radiometer working mode is starting when power is applied. The software will calculate the ambient gamma radiation dose rate DER in uSv/h or mSv/h units. New measurement cycle initialized when radiation level changed rapidly. For better accuracy of the measurements please wait until estimation symbol will disappear from the LCD.
The software has option for dose rate correction based on tube dead time settings. The correction is noticeable only on very high count rate. You can disable that function in menu if the correction is not required.
Average CPS Counter:
average CPS counter mode is intended for precision calculation of counts per second rate from radioactive samples, checking surface contamination and working with externally connected scintillation probes. You can set desired averaging period in calibration menu.
USB Logging:
The device has built-in USB for logging. The USB port has adjustable UART speed. You can log to computer CPM (counts per minute) or CPS (counts per second). Please check and download our freeware COM port terminal software
"Radiation Logger"
for CPM logging and online monitoring.
Geiger Tube compatibility:
The counter electronics and software is compatible with many popular GM tubes, such as 400V and 500V tubes. You can use SBM-20, STS-5, Gamma 7C, Beta-1 and Beta-2, LND-712, LND-7317, SBT-9, SBT-11, SI29BG, Vacutec 70019A and more.
Comfortable Buttons:
MyGeiger 3 is designed with 2 comfortable big tact switches for controlling the software, toggling LCD backlight and mute beeper function.
NEW!!!
You can download STL files to print enclosure on 3D printer in THINGIVERSE.
Search thing # 2279274
Search thing #
4459946 (for round buttons, Thanks to Marc!)
Search thing #
4202730
Calibration Menu with hints.
Simple system menu will allow you to setup your ratemeter easily. The menu has following functions:
SET CONVERSION:
can be set from 0.7 – 9.0 CPS to 1 uSv/h. Use Geiger tube datasheet to determine the correct value for your tube. The conversion factor is usable only for
Gamma
radiation.
SET ALERT LEVEL:
audible alarm for gamma radiation dose rate can be set from 1 uSv/h up to 200 uSv/h
SET DEAD TIME:
can be set from 10uS up to 250uS. Please use Geiger tube datasheet or oscilloscope to determine the correct value for your tube. If the function is not required set dead time to zero.
SET SLEEP TIMER:
timer for automatically power off. Can be set from 10 minutes up to 4 hours. Set to zero to disable the function.
SET SAMPLE TIMER:
timer for Average CPS mode. Can be set from 5 minutes up to 60 minutes. Set to zero for Average CPS mode without fixed timer.
SET UART SPEED:
default and recommended is 9600 baud. You can select 2400/4800/9600
USE EXTERNAL PROBE:
Set to NO if you are using Geiger tube connected to the board. Set to YES if you are using external scintillation probe driver or external Geiger tube driver. If YES is selected then internal High Voltage block will be turned OFF and only external tube can be active. Because HV capacitors are charged during device initialization, the high voltage can still be presented on the board, be careful!
SET DOSE RATIO:
the ratio of dose rate to estimated dose rate. It defines how the software can react to dose-rate leap. Useful mostly when leap is high. The ratio can be set from 3 to 20.  Recommended value for SBM-20  is 6.
SET TO DEFAULT:
restore all settings to default SBM-20 and reset the micro-processor
SAVE SETTINGS:
You just need to confirm you want to safe changes and exit the menu.
High Voltage Converter:
MyGeiger ver. 3 PRO high voltage output can be set with jumper for 420V or for 500V tube. The step-up converter is efficient on background and it able to supply 50uA to 500V output (10M resistive load). On ambient background radiation the HV circuit consumes from 0.1mA to 0.3mA. The HV converter is independent from microprocessor but it can be switched On/Off by software settings. The graph below is represent HV regulation during high activity source load on tube.
The HV stabilization result in test is 420V +/- 5%
Fast lithium battery charger:
the PCB has intelligent lithium charger IC with overcharging protection. You can charge battery with 5V USB wall adapter or computer. In addition, the software monitors battery level and, if it falls below 3.0V, then the software will force automatic sleep mode with lowest power consumption to prevent battery deep discharge.
Power saving sleep mode:
MyGeiger ver. 3 PRO has power saving sleep mode for Gamma Ratemeter. You can turn off the device with long pressing on left button. You also can set automatic power off timer in calibration menu.
Test video of the counter with rad. sources:
MyGeiger ver.3 DIY Geiger Counter Radiometer demonstration test - YouTube
Video will open in a new window
[isdntekvideo]
Our product is assembled with high quality electronic components and it has professionally tested PCB board with installed SMD parts.
The product build with original electronic components supplied by DigiKey and others reputable sources, we do not use low cost outlet components.
It possible to purchase the device without Geiger tube (or without battery) with a cheaper price, in case you already have your own tube or battery. Please contact me with "Details about item" request and I'll send you adjusted offer.
To our valued customers, please read purchase terms before you bid or buy!
We'll use the best shipping method availiable to your destination, however some areas and some countries now will take much longer to receive international mail. Please allow longer delivery time than usually and conact me prior buying if you want to change delivery method to DHL Express (recommended).
Packaging:
The product dispatched carefully packed into anti-static bag and sturdy carton box. We use only high quality and new packaging materials.
Technical issues and support:
If you purchase this item you are agree that you have skills and tools to perform required DIY soldering (or de-soldering) and you know how to connect additional external components or modules. All project components should be installed and soldered in proper polarity with proper connectors. Any hardware/software modifications
are not covered with warranty.
Please read carefully product title, description and include list. Any questions are welcome. If you received broken or defective parts please contact us first, because we can resolve this problem in best way.
Handling time:
10 business days to process international orders required after receiving cleared payment. This does not include the number of business days the shipping service will take to deliver the item to you. We can upload a tracking number during handing time even before your package was transferred to logistic company for the delivery.
Shipping:
We dispatch your order during 3-10 business day and will upload a tracking number to eBay for USA buyers only. Take note, international shipping is more complicated and longer than domestic, that's why when you buy internationally it mean you are agree to wait for the package. For Economy International Delivery default stated time is 3-5 weeks. Some countries may take longer because of your country custom regulation rules or postal service. USA usually takes 2-5 weeks; Europe 1-5 weeks; Australia 2-5 weeks; Germany 3-5 weeks; Israel 3-7 days; Russian Federation 4-6 weeks; All other countries 3-5 weeks default delivery time.
Tracking:
If you not received your package during 30 days please contact us first with "Details about item" request and not with opening "non-receiving case" directly. Take note, we ship through state export account and not from post office branch. This is the reason why your package is trackable only after it was sent abroad from Israel export and not at the date of collecting or at the date we uploaded a tracking number. Online tracking system in Israel displays information with big delays, post website provide tracking info
for reference only several days after your item was sent abroad
! Please be patient for the delivery and contact us if you have additional questions about shipping.
Custom & Duty Fee:
All international buyers are responsible to cover any possible custom fee or import tax that maybe applied at his/her country. We are obligated by export law of Israel to declare an order price as it was stated in your PayPal bill. German buyers, please remember when you buy that in Germany import custom rules require you to pay fee. We are not accept any claim because of your country custom regulation rules / delays / fee! Please contact your local custom office for more details about custom process and import tax.
You are responsible for any VAT, tariff, duty, taxes, handling fees, brokerage charges, customs clearance charges, etc. required by your country for importing consumer goods! There is no way for RH Electronics (the shipper) to predict your country's customs/fee habits, so be prepared to pay full VAT on the fully declared value of your order as well as any customs fees your postal system may charge you! If you do not pay the required brokerage fees, VAT, tariff, duty, taxes, handling fees, customs clearance charges, etc - we cannot issue any refunds.
Our shipping system is completely automated, and we cannot falsify customs forms. The customs forms will describe the cost of your order and contents as “Education DIY Kit for soldering”. We cannot mark orders as "gift" or lower the values.
Returns:
Accepted if you not started to solder/use device. In original package, including all components. You'll need to cover return shipping cost.
Payment:
Paypal only for eBay purchases.
V.A.T.:
If you live in Israel please take note, all buyers with DELIVERY ADDRESS WITHIN ISRAEL HAVE TO PAY 17% VAT. Refusing to pay tax will force us to cancel the order. If you live in Israel and want to purchase our item on eBay please contact us first with "Shipping details" request and we'll send you eBay offer with adjusted shipping price and VAT included.
Thank you for your positive feedback!