New Reflector FIT HP Scitex FB500 FB550 FB700 FB750 UV Lamp Shutter ERROR Motion

Description

Being offered is this new, (still has
plastic film in place tha
t protects the reflectors mirror surface - must remove before using), main, REAR section/piece of shutter reflector assembly that will FIT both service end and/or user end shutter assemblies of older Scitex FB 500's and FB700's and the newer FB550's , FB750's and FB950's.
As anyone who has worked on these machines knows;  o
ver time, the REAR main reflector of the shutter will developed stress cracks from its repetitive motion (
where it is riveted in place-see pictures of typical reflector fail
). These cracks will result in the reflector coming loose, rubbing on other
components within the shutter assembly,
and obstructing the free motion of the shutters pivoting reflector. Once this occurs, the pivoting mirror will make excessive noise and finally throw "UV shutter" or "UV Lamp Motion Error" and refuse to run.
Furthermore; up until now, this piece has not been available, and when this type of error occurs you have been forced to purchase a whole new shutter assembly for around 00.00. Recognizing the cost savings , I had several of these reflectors made, and I am keeping what need for my personal use, and selling the off the excess.
Why replace the whole assembly??
Replace the mirror at 10th of the cost.
That is what I do; and it works!
Be proactive; and buy extras, save more by reducing "downtime"!
Installation is easy!
Simply remove rivets that holds the damaged mirror in place (I found that using a Dremel tool to carefully, grind the head of the rivets off and pushing the rivets out, works best. Using a drill has the potential of making the original, mating, mounting holes oversize, resulting in an undesirable, sloppy fit. You want to maintain the tight fit to minimize movement during shutter movement. Just be sure to cover circuitry and direct the flying debris away) and firmly tighten this NEW Reflector in place, using the fasteners I will provide (red thread lock is NOT SUPPLIED but is highly recommended on the two fasteners used to replace the rivets).
Once the new mirror is installed, pivot the mirror to confirm free motion before installation.
Also after you install the new reflector, you may need to recalibrate the shutter assembly for optimum operation. This is a simple task using the machines touch screen, that I will gladly provide instruction written procedures (with the buyers request)
So even if it is not broken today; you know it is going to happen. The question is when. And how much production will you lose. Be prepared, buy it now, and save 00 in parts and countless hours of production.
It is not just me saying this; see comments I received below from buyers worldwide.
"Life Saver!"
"GREAT THANK YOU FOR FAST SHIPPING!!!"
"THANK YOU!!! JUST INSTALLED & IT WORKS PERFECTLY. SAVING US LOTS OF $$$$$$"
"Figured it was worth a shot.. surprisingly it worked great. Saved 00! Thanks!"
"Item was as described and worked great."
"Pure Genius! It fit like a Glove!"
"¡ Funciona genial! ¡ Envío rápido! ¡Gracias!"
"Thanks for going the extra mile for next day delivery. We made our deliveries"
"I followed your instructions, installation was easier than I expected."
"Work like a charm, thank you for saving us 00."
"I installed the reflector last week and it has been working very well. Thank you!"
"Just as described. A+++ Fast Shipping. Worked with me to get it overnighted"
NOTE: You are purchasing ONLY the piece shown in first 4 pictures. These are various views of an actual, single piece you will receive. First has protective plastic
film
off-and 2nd- 4th the film is still on, and slightly
peeled
back for hardware installation, hence the dull finish) - The 5th and 6th pictures show a typical example of failed part in whole assembly-(assembly IS NOT INCLUDED).
I still do have more
.
So; if you would like to purchase even more.
I have a lot of
2
of these rear reflectors at ebay listing
#
274738312599
THIS MIRROR WILL FIX A SHUTTER ERROR THAT IS CAUSED BY A CRACKED MIRROR ONLY. INSPECT THE REFLECTORS IN YOUR SHUTTER ASSEMBLY FOR CRACKS PRIOR TO PURCHASE.
SOLD AS IS. NO RETURNS.
As always, I encourage all potential bidders to ask questions before bidding. I will answer all questions to the best of my ability.
New!
I am now offering of the side, link, bridge, reflectors for these assemblies! Sold in sets, 1 left and 1 right, see listing #
274739556988
I do have many other vintage items for sale. Please take the time to look at our other items! We do combine items, provided they are not too heavy AND PAYMENT IS RECEIVED ON THE SAME DAY. To check our other items; simply click HERE!!
Fair Shipping Costs
At the close of this auction, the winner agrees to contact the seller, confirm ship-to address, and wait for seller’s invoice before paying. Shipping costs are based upon the actual weight of packaged item and buyers Postal code. PLEASE WAIT FOR INVOICE BEFORE MAKING PAYMENT. For both domestic and international purchases, invoices will be sent with three shipping options for buyer to choose from.
Shipping Within the Lower 48
For this item, I am offering a flat rate of .00 for USPS Priority Express Shipping where available. (
typically this is a one day delivery domestic service to the mainlands more densely populated cities; 2 for the more remote, rural
locations).
Per request; I have added a USPS Priority option for those proactive buyers, who are not in a hurry. (2-3 day delivery) Flat rate cost for the lower 48 is .50.
Both of these costs cover USPS charges I
incur
for; flat rate envelope, full insurance coverage and delivery confirmation (signature required).
International Shipping (including Alaska, Hawaii & Puerto Rico)
For overseas shipping, I will offer USPS
Priority
Express shipping, based upon the actual weight of the package, and destination. (where
available)
This service is described as 3-5 day to many major markets. But USPS website also states that "this is based upon average performance to major markets, and the actual transit time may vary for origin and destination.
And although a buyer may this a premium, expidite service; they should also understand that any customs and/or Global Pandemic delays are out of my control. Furthermore. Through the EBay Message System; I will send the buyer of a picture of the USPS reciept, the moment the US Post Office is in possesion of your package.
Furthermore; the USPS website also states that their "
Priority
Express shipping" is not available to all regions. If this should happen, standard USPS Priority International will become the means/method used (6-10 day delivery
and "this is based upon average performance to major markets, and the actual transit time may vary for origin and destination")
and any shipping overpayment will be refunded.
It should be noted that the times listed above were taken directly from the carriers respective website, and they (or I) have no control over customs, so times may obviously vary.
Please understand it is not meant to be rude, but is a matter of being treated fairly the same as buyers expect to be treated. Failure to comply will result in buyer being placed on the blocked bidder list & reported to eBay for abusing money back guarantee programs and/or misusing returns!
Although most buyers are very good about paying for their items, there are a few who must be told.....Please do not bid unless you intend to pay! An unpaid item case will automatically open after 7 days, and bidder will be placed on the blocked bidder list!
Thanks for looking!