-40%
Positive Polarity Adjustable High Voltage Module for PMT Photomultiplier 1kV
$ 26.4
- Description
- Size Guide
Description
Technical Specifications:Positive Polarity High Voltage stabilized output: 700V-1000V
Compatible with DIY Scintillation Probes
Input DC voltage: 5V
Input current consumption with 100M load at 1000V: 10mA
Full start time: app. 10 seconds with 100M probe load
Recommended load of the PMT probe divider: 80-100 Mega ohm
Excellent output filtartion
Comes with branded silicone high voltage wire
Supplied coated with HV varnish
Module diameter: ~45mm
Shipping Weight: 150gr
SKU: RH-M-PMT-NG
Miniature high voltage module for DIY amateur Gamma Spectrometry or Scintillation probe. The module has regulated HV output for photomultiplier tube. High voltage output has POSITIVE polarity. Recommended load is 100Mega ohm divider on PMT. PCB diameter is only 45mm and it supplied coated with special high voltage varnish. The output wired with branded silicone wire.
Fits photomutplier tubes like Hamamatsu R6095, R6094, R9420, XP3112 or similar. It also will fit perfectly vintage stock tubes from USSR like FEU-31 or FEU-35. The module is not compatible with tubes that require higher voltage than 1100V for normal operation. Please check tube datasheet for amplification factor vs high voltage.
You are welcome to visit my store to view additional items!
We'll use the best shipping method availiable to your destination, however some areas and some countries now will take much longer to receive international mail. Please allow longer delivery time than usually and conact me prior buying if you want to change delivery method to DHL Express (recommended).