Sunnen P-190 Honall Valve Guide Hone Set (5/16" 11/32" 3/8" 7/16")

Description

Sunnen P-190 Honall Valve Guide Hone Set (5/16" 11/32" 3/8" 7/16")
A few of the wedges and mandrels had some flash rust cleaned off, leaving some stains. (pictured)
A couple of the wedges were bent up at the tips, but after straightening they all perform as intended.
Sunnen P-190 Valve Guide Hone Set is designed for sizing and finishing holes in work too bulky or heavy to take to your honing machine. It uses the same mandrels and stones used in Sunnen Honing Machines.
This tool sets up fast and is easy to use. It is ideal for high performance applications. Use a low RPM 1/2" drill for driving power (no more than 200rpm for best results)
Comes with the following items...
*The included mandrels and stones are listed below with old and new part numbers respectively*
(1) P-190 Honall Guide Hone
(1) Long Allen Key Wrench for the P-190
(1) PK10A Adapter
(1) PK12A Adapter
(1) LG-308M or BL10-308AS Mandrel & Wedge
(1) LG-339M or BL10-339AS Mandrel & Wedge
(1) LH-370M or BL12-370AS Mandrel & Wedge
(1) LH-432M or BL12-432AS Mandrel & Wedge (New: The wedge hasn't been trimmed to fit into the P-190 yet)
(1) S-308 Truing Sleeve
(1) S-339 Truing Sleeve
(1) S-370 Truing Sleeve
(1) S-432 Truing Sleeve
(6) LG-13 or L10-J69 Honing Stones
(6) LH-7 or L12-J47 Honing Stones
(5) LH-13 or L12-J67 Honing Stones
(1) Metal Case
If interested internationally, please contact us to work out the most economical shipping method.
For more engine rebuilding tools and equipment,
Visit My eBay Store: e-cavco
con(d)