UNCOILER BATTALION NO.61 PEX DRIP PROPANE GAS TUBE UNWINDER DECOILER DISPENSER

Description

[SEE SHIPPING DETAILS BELOW]
See our demo videos on firemanuncoilers
PRESENTS
Uncoiler for Pex and Drip tubing
The Battalion No. 61 is the heavy lifter of the Fireman line for use with larger rolls of tubing up to 48” O.D. and 150 lbs.
(See our other ebay auction for our smaller Commander No. 1 Uncoiler - ebay item #
171810428084
)
Light weight (24 lbs.); Sets up in less than one minute, demounts in less than one minute; Easily transportable, compact design; Rugged, dependable construction; Made with quality and pride in the USA.
[
note
: unit in photos below has the earlier 54" long arm - a 56" long arm is now standard for Battalion No.61 as shown in main item photo above]
…so why use an uncoiler??
Handling rolls of coiled pex or drip polyethylene tubing can be frustratingly inefficient, often requiring two workers. The common method of pulling the material from the coil center or even from the coil outer circumference often leaves twists in the laid out tube which can easily develop into kinks.
Using the Fireman Battalion No. 61 uncoiler provides an excellent solution to this problem while allowing one worker to handle, set up and install the tubing alone. The tubing is dispensed from the coil exactly as it was installed at the manufacturer -
straight without kink producing twists.
The labor savings obtained by the greatly improved installation efficiencies quickly add up to significant profit savings over time.
…how does it work?
Once at the job site, the bungee lock is removed and the channel legs are rotated 90 degrees into the open position, where they automatically lock. The upper channel arms are partially opened and the Tube inner guides raised.
A unique benefit of the Fireman Battalion No. 61 is the ‘Smart load’ side loading feature. This allows even a heavy roll of tubing to be handled by one installer alone without risking back injuries or strains. It’s a simple, safe and quick procedure:
The installer rolls the coil onto the upper leg of the tool, steps across to the opposite side, and lowers the coil onto the partially opened channel arms. The channel arms are then positioned into the fully open position, where they automatically lock.
The tube inner guides can then be quickly adjusted to the coil inner diameter, again automatically locking into place. Polyethylene foam supports are placed into position under the coil on the lower channel arm to provide a net level surface. The Top bar member is placed onto the upper coil and attached to the tool with a bungee tensioner, securing the coil. The tubing can now be fed through the rotating Tube guide, and you’re ready to dispense.
The light weight of the tool (24 lbs.) and carry strap allow comfortable, stress free transport of the tool to the work site, even in hard to access areas. Mounting holes are provided for mounting to an ATV, wheel barrow, cart, or other devise, giving added versatility.
…why a Fireman uncoiler?
The Fireman Battalion No. 61 uncoiler is currently the best solution and best value on the market, costing far less than other uncoilers and offering much greater ease of use, versatility and value. The lightweight design (24 lbs.) makes it practical and easy to transport from truck to job location without injury or strains. It sets up and demounts faster than any other uncoiler.
Also, many uncoilers suffer from complicated designs that are comprised of an array of articulating parts, making them very susceptible to even minor damage rendering them unusable. The Fireman Battalion No. 61 incorporates fewer, more robust parts, providing a rugged and dependable tool that will provide years of trouble free use.
The labor savings it provides will quickly pay for itself, allowing greater profit with less labor expense, giving an excellent return on investment over the life of the tool.
See our demo videos on firemanuncoilers
FEATURES:
·
Light weight - 24 pounds vs.
60 to 100+ pounds
for other uncoilers
·
Quick set up with self-locking arms and legs, self-locking adjustable inner tube guides
·
‘Smart load’ tube side-loading capability to help prevent back injuries and allow one man operation
·
Quick demounting and compact design for storage and easy transport
(carry strap included)
·
Tubing unrolls straight without kinks or twisting – no more tubing memory twist problems
·
Significant labor cost savings –easily achieve 200% increase in productivity
·
Rugged, reliable design for trouble free use and minimal tool maintenance requirement
·
Mounting holes for attachment to your ATV, truck bed, trailer, cart, wheel barrow
SPECIFICATIONS
:
Material:
6063 Aluminum Channel; zinc chromate plated steel; stainless steel; UHMWPE plastic [unbreakable]; DELRIN [Acetal]; Needle roller bearings w/ hardened steel washers; Neoprene lower bearing seal/friction brake
Tool dimensions:
Length 57”
Height 14”
Width 2.75”
Weight 24 lbs. [shipping weight: 27 lbs]
Tube loading capacity:
Maximum Tube roll O.D:
48”
[56” overall actual arm length]
Maximum Tube roll height:  16”
[can be increased to 17 ½” by using optional
Flex post screw hole]
Minimum Tube roll I.D.:
15”
Maximum Tube roll I.D.:
29”
Maximum load:
150 lbs.
See our demo videos on firemanuncoilers
U.S.A. SHIPPING:
We ship the day of order for Ground shipment orders placed by 2:00 pm PST – orders take up to 5 days (to East Coast locations)
For expedited shipping, same day shipping is available for orders placed by 12:00 pm PST
INTERNATIONAL SHIPPING:
[
Canada
Only]:
we now ship using usps priority mail to save you the excessive brokerage, handling and hidden fees charged by other shippers
We will ship to all other international locations with USPS International Priority or UPS World Saver
Package dimensions: 60" x 14" x 3"         weight: 28 lbs
.
Any tariffs, customs or additional fees or shipping costs will be paid by the buyer to any regulating agencies.
RETURNS / REFUNDS
Item must be in as new condition, with no signs of field use, marks, scratches, blemishes, alterations, or added markings or identifying imprints or marking. Buyer agrees to pay for any such damage; the amount, determined by Fireman Uncoilers, will be deducted from the total refund paid to the buyer in accordance with ebay partial refund policies.
IMPORTANT!! - Take every precaution to include all tool parts and pack the tool carefully to avoid incurring costs due to cosmetic damage during return shipment.
.
See our demo videos on firemanuncoilers